My Cart 0 Item ($0.00)

 
 
 
 

Firmware for Series I Units

 
   
 
  Climate Monitors
 
- WatchDog 15
- WatchDog 15-PoE
- WatchDog 100
- WatchDog 100-PoE
- MiniGoose XP II
- WeatherGoose II
- SuperGoose II
- RelayGoose II
- RelayGoose II-PoE
- RAC10
  Digital Sensors
 
  Analog Sensors
 
  Accessories
 
  IP Surveillance Cameras
 
  Console Aggregator
 
  Warranties
 
 
  
   
 
 

Download the latest firmware for WxGoos Series-I units.  Each update is a complete firmware image, so there's no need to apply multiple patches in succession to update your unit from an older version to the latest one; just download and install the most-current version.  Instructions on how to apply the update are included inside the .ZIP archive file.

Caution: Failure to follow the included instructions may cause a Series-I unit to permanently lock up, requiring the unit to be returned to ITWatchDogs for servicing!

Note: If your unit is currently running a firmware version of v2.93 or lower, be aware that due to a change in the internal data format, any temperature data recorded in the unit's memory will be scaled incorrectly after upgrading to v2.94 or higher.  If the logged data is important, please download and save your log history before applying the firmware update to the unit.

Also note: if your unit is currently running a v1.xx firmware version, please contact ITWatchDogs technical support for assistance before attempting to install a v2.xx firmware version, as you may need to install additional patches before your unit will accept a v2.xx firmware update correctly.

 

This firmware supports the following devices:

WeatherGoose (WxGoos-1)
SuperGoose (WxGoos-2)
MiniGoose (WxGoos-3)
MiniGoose 2 (WxGoos-4)
PowerGoose
RCM-H
RCM-H IEC
 
 

Downloads

WxGoos Series I v2.97 — (released Jun. 14, 2011)

  • enhancements:
    • ♦ improved handling of spurious errors on RTHD, RTAFH2 and RTAF2 sensors that could cause them to show up as "Unavailable" or "Unplugged"
    • ♦ Delayed alarm actions, to prevent nuisance notifications
    • ♦ Better handling of new sensor devices not supported by series-I models: (DM, IOE, RPM X2)

WxGoos Series I v2.94 — (released Aug. 12, 2010)

  • bug fixes:
    • ♦ Potential lock-up issue when rebooting unit.
  • enhancements:
    • ♦ Support for new RTAFHD3 airflow/temperature/humidity combo sensor.
    • ♦ Temperature logging range changed to -40°C (-40°F) to +123°C (+253°F)
      Note: data logged prior to applying this update will not be displayed correctly after the update, due to changes in the internal data-storage format.  ITWatchDogs recommends clearing the log history after applying this update.

WxGoos Series I v2.93 — (released May 26, 2010)

  • bug fixes:
    • ♦ DLink DCS-910 camera not showing thumbnail images correctly.
  • enhancements:
    • ♦ improved tolerance for certain sensor-bus errors with CCATs.

WxGoos Series I v2.92 — (released Mar. 15, 2010)

  • bug fixes:
    • ♦ Issue inadvertently introduced in v2.91 that could cause units to become unresponsive.
    • ♦ Analog-input port data incorrectly reporting as Humidity, Airflow and Light in SNMP on some units.
  • enhancements:
    • ♦ added support for all currently-existing Axis and Linksys webcam models.
    • ♦ improved SNMP sysObjectID conformance with RFC 1213
    • ♦ improved bus-communication reliability with CCAT sensors
    • ♦ ASW sensor names made consistent

WxGoos Series I v2.88 — (released Dec. 04, 2009)

  • bug fixes:
    • ♦ closed a security hole that could allow changes to a unit's configuration without requiring a password
  • enhancements:
    • ♦ added support for D-Link DCS-920 webcams

WxGoos Series I v2.87 — (released Nov. 11, 2009)

  • bug fixes:
    • ♦ fixed a potential false-alarm issue when using the internal temperature-offset settings.
  • enhancements:
    • ♦ improved error tolerance when communicating with RTAFH and RTHD sensors.
    • ♦ added a checkbox on the Alarms page to disable "sensor unplugged" alarms if desired.
    • ♦ added support for more D-Link webcam models.
    • ♦ added support for most Axis webcams.

WxGoos Series I v2.86 — (released Aug. 14, 2009)

  • bug fixes:
    • ♦ some sensors would show "unplugged" after only one communication-bus error; unit will now retry several times before declaring a device unplugged.
  • enhancements:
    • ♦ e-mails now send the unit's current IP address when using DHCP.
    • ♦ config page shows unit's current DHCP-assigned network settings when using DHCP.

WxGoos Series I v2.84 — (released May. 2, 2009)

  • bug fixes:
    • ♦ temperature offset was not being used consistently in certain error conditions
  • enhancements:
    • ♦ SNMP reports all amp readings in deciAmps (tenths of an Amp), to allow for fractional Amp values to be reported, as a workaround for the fact that SNMP doesn't support floating-point values.
    • ♦ added support for D-Link DCS-3410 and DCS-910 webcams
    • ♦ SNMP "set" operations for sysLocation, sysName, sysContact
    • ♦ Device description fields refer to sysLocation, sysName, and sysContact
    • ♦ MIB entry name and titles are more consistent
    • ♦ added MIB entry units to CSV file

WxGoos Series I v2.78 — (released May. 5, 2008)

  • bug fixes:
    • ♦ fixed "friendly-name" display bug
    • ♦ fixed a bug related to partial or fragmented packets in SSL
    • ♦ fixed "address-backup" attribute in XML
  • enhancements:
    • ♦ added support for Panasonic IP-enabled webcams
    • ♦ improved compatibility with Apache proxy
    • ♦ improved CSV file compatibility with Excel™
    • ♦ removed unused SNMP Read/Write Community from config page

Note: firmware revisions older than v2.78 are deprecated, and not available for download; change-logs beyond this point are provided for informational purposes only.
If you have an application-specific need for an earlier v2.xx version, please contact ITWatchDogs technical support for assistance.

WxGoos Series I v2.76 (released Feb. 4, 2008)

  • ♦ added: CCAT sensor types for City Power Monitor, Smoke Alarm, -48Vdc, 30Vdc
  • ♦ added: ESMTP AUTH support ( login, plain, CRAM-MD5 )
  • ♦ fixed: new SNMP code with speed & stability improvements ( download new MIB from Goose )
  • ♦ fixed: WAP page incompatibility with some mobile browsers
  • ♦ fixed: XML Dewpoint sensor keys aliased with Temperature keys

WxGoos Series I v2.75 (released Jan. 10, 2008)

  • ♦ added: unit description field to Config page and footer
  • ♦ added: sensor count to SNMP
  • ♦ fixed: multiple sensor instances issue
  • ♦ fixed: alarms show tripped status on XML page
  • ♦ fixed: SSL problems

WxGoos Series I v2.72 (released Oct. 9, 2007)

  • ♦ fixed: remote temp sensor value glitches
  • ♦ fixed: negative values mislabeled on graph axis
  • ♦ fixed: max values on graph coincide with graph border

WxGoos Series I v2.70 (released Sept. 20, 2007)

  • ♦ added: immediate sensor value displayed in 'logs' page
  • ♦ added: support for digital CCAT sensor
  • ♦ added: support for D-Link DCS-2000
  • ♦ fixed: WAP page not affected by view-only account
  • ♦ fixed: friendly device name not displayed in browser window

WxGoos Series I v2.65 (released Jun. 22, 2007)

  • ♦ added: support for dew point sensor
  • ♦ added: alarmTripType SNMP Trap variable binding
  • ♦ added: support for D-LINK DCS-3220
  • ♦ fixed: NTP service did not switch between primary/secondary addresses on NTP server timeout
  • ♦ fixed: temp sensors become unplugged near 0 °C
  • ♦ fixed: sensor friendly name and product friendly name in MIB Trap definition
  • ♦ fixed: incorrect sensor friendly name OID value in SNMP trap

WxGoos Series I v2.63 (released Jan. 12, 2007)

  • ♦ fixed: DNS applies to NTP
  • ♦ fixed: updater not allowing updates to units with certain older firmwares

WxGoos Series I v2.62 (released Nov. 14, 2006)

  • ♦ added: Support for DNS names in SMTP, POP3, SNMP, and NTP server names
  • ♦ added: PDA control page for RCM
  • ♦ added: Support for D-Link DCS-6620 camera
  • ♦ added: Telnet "uptime" command displaying elapsed time since last reboot
  • ♦ added: Telnet "datalog" command to dump sensor log data for debugging
  • ♦ added: Alarm emails now display most useful information first for devices that truncate emails (e.g. cell phones)
  • ♦ added: Device administration information now included in status report and alarm emails
  • ♦ fixed: Adding in missing imports (normally tacit) from MIB
  • ♦ fixed: MiniGoose and RSMINI163 now respect user-specified internal temperature offset
  • ♦ fixed: Alarm buzzer option removed for RSMINI163
  • ♦ fixed: No longer allows arbitrary number of simultaneous telnet connections
  • ♦ fixed: Device checksum not being displayed in telnet "report" command
  • ♦ fixed: Removed "HTML v4.0.1 Verified" image from the bottom of the page as it gave spurious error message on certain browsers when using HTTP/SSL

WxGoos Series I v2.60 (released Aug. 18, 2006)

  • ♦ added: Periodic status report email, configurable frequency
  • ♦ added: Internal temperature adjustment from web page
  • ♦ added: Complete support for HTML v4.01 W3C standard
  • ♦ added: Alarm e-mails now more descriptive
  • ♦ added: Configurable port numbers for SMTP and POP3 services
  • ♦ added: Checkboxes work when you click on their labels
  • ♦ added: Better error-handling for timezone offset setting
  • ♦ fixed: Saving alarms page could sometimes send extra alarm notification
  • ♦ fixed: First char in camera IP had to be a digit; now it can be alphanumeric
  • ♦ fixed: Support for SMTP servers that output multiple lines for welcome message
  • ♦ fixed: Changing NTP timezone no longer forces reboot
  • ♦ fixed: MIB CSV file now has correct values for "read/write" column
  • ♦ fixed: Downloading CSV raw log data and log dumps is now cancelled when firmware upload is initiated

WxGoos Series I v2.56 (released May 16, 2006)

  • ♦ added: Support for up to 4 cameras displayed on a single unit
  • ♦ added: Support for D-Link DCS-5300/5300G camera
  • ♦ added: Support for MiniRSE 136
  • ♦ fixed: Read-only username couldn't be set in certain cases
  • ♦ fixed: Support for up to 16 RTAFH sensors (was failing after 12)
  • ♦ fixed: HTML/XML error when certain special characters appears in friendly names or logging statements
  • ♦ fixed: Buffer over-run in event time-stamp logger
  • ♦ fixed: Removed special "(None)" FTP account
  • ♦ fixed: Very occassional "[nil]" displayed as the name of the unit

WxGoos Series I v2.55 (released Apr. 12, 2006)

  • ♦ added: SNMP community strings for read-only and read/write access
  • ♦ added: Including Excel™ spreadsheet with detailed MIB report in installer ZIP file
  • ♦ added: Support for browsers (especially on PDA's) that don't support the <IFRAME> HTML tag
  • ♦ added: Device support for new enhanced console features
  • ♦ fixed: Bounds-checking error on humidity readings on AFHT2 external sensor

WxGoos Series I v2.51 (released Jan. 31, 2006)

  • ♦ added: Now using GIF format for graphs for faster download times
  • ♦ added: Support for D-Link 900 and 950/950G cameras
  • ♦ added: Additional device data in XML report
  • ♦ fixed: FTP server update for faster retry when firmware upload fails
  • ♦ fixed: restore defaults sets correct port numbers for http/https and forces reboot

WxGoos Series I v2.48 (released Nov. 29, 2005)

  • ♦ added: SSL v3.0 and TLS v1.0 support for HTTPS
  • ♦ added: ability to disable either HTTP or HTTPS servers and set port numbers
  • ♦ added: four new data fields to store device location and administrative contact information
  • ♦ MIB update to support NetSNMP library/console client software
  • ♦ fixed: airflow graph occasionally spikes
  • ♦ fixed: random buzzer alerts when many devices plugged in at the same time
  • ♦ fixed: graphs drawn incorrectly on some Macintosh browsers

WxGoos Series I v2.46 (released Oct. 10, 2005)

  • ♦ added support for new RTAF/RTAF-H sensors
  • ♦ added tooltips to sensor display
  • ♦ new double-click-and-wait installer
  • ♦ CSV export now uses friendly names in column headings
  • ♦ fix for bogus "relay failure" indicators on PowerEgg2
  • ♦ added support for new WxGoos-3 (MiniGoose) product line
  • ♦ administration passwords now apply to TELNET/FTP servers
  • ♦ added ability to enable/disable TELNET and SNMP servers
  • ♦ added ability to change HTTP port

WxGoos Series I v2.30 (released Jul. 20, 2005)

  • ♦ removed underscores from MIB trap variables for compliance with certain SNMP consoles
  • ♦ support for RSM-H2 and PowerEgg2 outlet on/off control
  • ♦ added alarm data to XML
  • ♦ fix for broken graph problem

WxGoos Series I v2.29 (released Jun. 21, 2005)

  • ♦ fix for having identical read-only and administrator usernames and passwords
  • ♦ fix for temperatures between -20°C and -10°C
  • ♦ e-mail test feature had trip/clear setting swapped
  • ♦ support for new RSM-H2 unit
  • ♦ support for new airflow/temp/humidity combo remote sensor
  • ♦ cameras supported in new Console

WxGoos Series I v2.27 (released Jun. 2, 2005)

  • ♦ added ability to send test alarms (both traps and emails) for any given alarm condition on any sensor and device
  • ♦ fixed bug where "Restore Defaults" causes accessories to disappear until device reboot
  • ♦ support for English power (208V) in base and accessories
  • ♦ small XML format change for compatibility with ITW Console

WxGoos Series I v2.22 (released Apr. 4, 2005)

  • ♦ support for new remote sensors: airflow with offset, door, water, 0-5V meter
  • ♦ changed trap numbers to be comptabile with What's Up Gold's 2-byte limitation
  • ♦ special handling for certain types of temperature sensor errors
  • ♦ fast remote device communication for faster "real-time data" updates
  • ♦ changed POP3 protocol slightly for compatability with certain mail servers

WxGoos Series I v2.19 (released Mar. 16, 2005)

  • ♦ Better error-handling in noisy environments with remote sensors

WxGoos Series I v2.18

  • ♦ Added support for multiple alarm e-mail receipents
  • ♦ Added "clear" trap support in device and in MIB
  • ♦ Fixed bogus alarms on device startup
  • ♦ Fixed infrequent error in sending traps
  • ♦ Added more graph colors
  • ♦ Sending alarms for "high," "low," and "unplugged" as separate events instead of single "set/clear" event

WxGoos Series I v2.11 (released Feb. 2, 2005)

  • ♦ Fixed SNMP traps with incorrect "Agent Address"
  • ♦ Added SNMP traps to the MIB
  • ♦ Fixed gaps in logs during long CSV downloads
  • ♦ Fixed crash on SNMP trap
  • ♦ False failures on SuperGoose's
  • ♦ Airflow/Temperature correction algorithm

WxGoos Series I v2.02 (released Jan. 14, 2005)

2.2 WxGoos Series I Firmware (2005-01-14 401KB)

  • ♦ Added remote reboot telnet command
  • ♦ Another fix for "gray graph" problem
  • ♦ Support for new SuperGoose and PowerGoose products

Note: v1.xx firmware revisions are obsolete, and are not available for download; change-logs beyond this point are provided for informational purposes only.  If your unit is still running a v1.xx firmware, please contact ITWatchDogs technical support for assistance before attempting to install a v2.xx firmware.

WxGoos Series I v1.32 (released Dec. 14, 2004)

  • ♦ Various SMTP/POP3 fixes
  • ♦ When power off on PowerEgg, now shows as "unplugged"
  • ♦ Improved logging accuracy for certain sensors
  • ♦ Fixed custom log error where the legend doesn't match the graph
  • ♦ Fix for "gray graph" problem

WxGoos Series I v1.24 (released Sept. 6, 2004)

  • ♦ Added support for separate "read-only" and "admin" accounts
  • ♦ Added password verification fields
  • ♦ More efficient air-flow sensor readings

WxGoos Series I v1.20 (released Jun. 29, 2004)

  • ♦ Re-fixed I/O 2&3 naming problem
  • ♦ Added WAP and PDA support
  • ♦ Log data now lists actual time if NTP server present
  • ♦ Adjusted default ranges on I/O ports

WxGoos Series I v1.19 (released Jun. 21, 2004)

  • ♦ Fixed an issue with non-responsive RTAF Sensors

WxGoos Series I v1.18 (released Jun. 14, 2004)

  • ♦ Fixed door sensors only responding once
  • ♦ Downloadable CSV file now available under 'Logs' tab
  • ♦ Updated MIB
  • ♦ Remote Airflow compatibility improvements

WxGoos Series I v1.17 (released May 19, 2004)

  • ♦ Added NTP support

WxGoos Series I v1.14 (released Apr. 16, 2004)

  • ♦ Fixed passwords not taking effect
  • ♦ Fixed automatic rebooting
  • ♦ Fixed I/O 2&3 port naming

WxGoos Series I v1.10 (released Mar. 16, 2004)

  • ♦ Added graphing support
  • ♦ Optimized internal logging
  • ♦ Can now read temperatures below zero

WxGoos Series I v1.00

  • ♦ Initial release
About Us   |   Product List   |   Where to Buy   |   Resources   |   Contact Us   |   Support
©2012. ITWatchDogs.