The SuperGoose includes all the features of the WeatherGoose plus the following:

• A built-in LCD display for easy on-site monitoring
• An audio alarm triggerable by any sensor
• Built in rack plate at no extra charge

Containing an internal web server this unit operates completely stand-alone with no supporting PC or client software required. Internal sensors include temperature, humidity, air flow, light level, and sound level, plus three analog input ports. An internal 5 port serial port hub makes adding remote sensors easy. The user needs only a Web Browser to view the environment conditions. The unit creates internal HTML (Web) pages, e-mail and paging alerts. A full SNMP MIB is included. One WxGoos-1 can monitor 16 remote sensors. A small plug-in wall transformer provides power. The WeatherGoose is integrated into a 19" 1-U high rack mounted panel.

Complete environment and power monitoring in a convenient 1-U rack unit. All the features of a WeatherGoose plus power monitoring (current, voltage, watts, and others) in one box. Complete with ten 5-20R power receptacles on the rear of the unit. Adjustable mounting brackets. (Note: receptacles can not be switched on/off through the web interface.) Rugged. 120VAC

A WeatherGoose with only one internal temperature sensor in a small metal box. Supports up to 16 remote sensors (sold separately). Mounts with four screw holes. Plug-in wall transformer included. Perfect for in-cabinet installations where space is short or where you need a lot of climate monitors at a low price. Run the remote sensors to remote cabinets. Web Camera is supported. Remote sensors include temperature, humidity, air flow, door position, power measurements and many others. An accessory rack mounted 16 port splitter is available for $99.

An expanded MiniGoose with 16 external sensor jacks and three I/O ports in a rack mount. Ideal for cabinet monitoring applications. Contains an internal temperature sensor. The RJ-12 receptacles can use remote termperature, humidity, and air flow sensors with up to 600' of aggregate cable length. The three I/O ports can be used for door position sensors, water sensors, or current transformers.
Plug-in wall transformer included. Up to four Web Cameras are supported.

Install your MiniGoose 1 in this rack-mounted option and you get 16 remote sensor ports. The MiniGoose 1 is not included. Lets you avoid using a lot of telephone splitters to get a bunch of remote sensors.

Battery-powered, 1-U rack-mount temperature sensor. Put the end of the included 12' temperature sensor cable in the hottest spot of your blade server or other high heat-producing equipment. +/- 0.5°C accuracy. Batteries should last well over a year. Uses two AA cells (not included, rip them out of your old AM/FM radio). Unit reads hundreds, tens and units. Cycles between F and C readings. Low battery alarm.

This weather station attaches to a PC serial port and warns of damaging environment changes: perfect for server room or remote computer room monitoring. With door sensors, you know when a door has been opened. Add a Web Cam (USB, sold separately) and see what's going on out there. Internal sensors include temperature, humdity, air flow, light level, door position and sound for smoke alarm detection. Complete software included.

Liberate your climate monitoring system from server dependency. Add the new features of a WeatherGoose to your existing WeatherDuck installation with this modified WebFoot. Plug in a WeatherDuck and place it anywhere with access to a network jack and power.

No server available for WeatherDuck attachment? The WebFoot converts a serial port to an Internet address. You can assign a static IP address or lease one from your DHCP server. The WebFoot bidirectionally converts serial data into TCP/IP packets. A redirector software package allows COM port data to go to an IP address. An auto-discovery/configuration program is also included. The mounting kit allows for secure WeatherDuck attachment. Will Internet-enable many legacy serial devices.

Three separate sensors in one 4" tube. Up to 16 of these can be attached to any Goose monitor. Perfect for use with the MiniGoose. Use a splitter to expand the number of jacks. Ships with clamp-style mounting clip.

Connect up to 16 of these small combined sensor units to get complete climate monitoring in hard to reach places. Put one next to a fan and be alerted the minute it stops.

Up to 16 temperature probes can be placed in hot spots. Stick one in the cabinet inlet and one in the outlet to diagnose air-flow problems. Put one in the A/C vent to detect problems at the source. Accurate to +/-0.5°C. Run them hundreds of feet from the Weather Duck, WeatherGoose or MiniGoose.

Converts an analog sensor into a digital sensor that can be connected to a 1-wire port. Useful for units that don't have an I/O port(like the MiniGoose) or for adding additional analog sensors to a unit that does. The CCAT needs to be programmed for the type of analog sensor that will be connected to it. When ordering select please choose one of the following types: water, door contact, current transformer, or millivolt

For multiple remote sensors this 5 port splitter makes the installation easy. Chain them together to connect up to 16 sensors. One RJ-11 plug, five receptacles, 5 foot cord. White.

Put this cable around the periphery of your server room or around data cabinets and get early warning of water entry. Get an e-mail or page when water hits. Comes with wall mounted control box. Uses two Weather or SuperGoose I/O ports. Reports when the cable is wet, disconnected or faulty.

This simple magnetic sensor detects when the cabinet door is open. Get an e-mail with a web-cam photo attached when the door opens and see who is messing with your gear.

Know when smoke invades your room. The kit contains a standard Kidde sensor plus all the wiring to connect to a WeatherGoose, SuperGoose or WeatherDuck. Up to 3 per Goose or Duck.

Detect rising water before it ruins your gear. Connects to the I/O ports on the WeatherDuck, WeatherGoose and SuperGoose.

Update existing power strips with this in-line power meter. By inserting the meter between the power source (typically a power strip) and the power source (wall plug or PDU) you can easily learn amps, volts, watts and power factor. The values are continually displayed in bright red LED numerals. The standard EGG0-IEC uses C13 and C14 connectors. A kit EGG0-NEMA adds two North American style connectors for 5-15 NEMA connectors. A cord and adaptor easily convert the unit to typical power strip connectors. Using these connectors the EGG0 is rated at 15 amps.

This is a sample of a current transformer that can be attached to a WeatherDuck, WeatherGoose or SuperGoose. This one measures 100amps, single-phase.

Plugs into a standard outlet. Alerts you when city power is lost, so you know how long the UPS has been on. Connects to the I/O port on the WeatherGoose, SuperGoose and WeatherDuck.

Designed to monitor -48 volt telephone batteries this sensor converts the positively grounded batteries into a negatively grounded 0 to 5 VDC signal capable of being monitored be any of the WeatherGoose Monitors. Connects to the I/O port on the WeatherGoose, SuperGoose and WeatherDuck. No separate power supply for this sensor is required.

Why run wires to your WeatherGoose? Put one of these boxes at each end of the Cat 5 cable and the power is supplied over the Ethernet cable. Maximum cable length 300 feet. Works with any Goose; Weather, Super, Mini 1 and 2.

Get a live video stream of your server room. The D-Link 950 Web Cam is the best in Internet-based video monitoring and priced right. Three zones of motion detection with e-mail alerts. Integrates with all Geese and integrates into WatchDog Console. Mount to a wall or the top of a server rack for complete server room pictures. Integrates into WeatherGoose display page. Add WatchDog Console V2.1 for video consolidation of up to 100 cameras.

See who's poking around the server room. We tested many cams and this is our pick. Ugly, but great pictures with easy focussing. Works with WatchDog Console, too.

New release, many new features. (Feb 06). The WatchDog Console combines multiple devices into a single web interface. Consolidates up to 100 WeatherGooses or WeatherDucks and their video cameras. Make HIPAA logs easily. Upload new firmware (push to multiple, mixed type devices) easily. Consolidated graphing. Measure and graph all IT WatchDog products at once. See at a glance if any sensor reading looks funny. Makes multiple server room facility tours a breeze. Simple install. Type in the IP addresses and you're running. Color coded status page.
Supported on Windows NT/2000/XP- runs as a service.

Monitor and control all your IT WatchDog components from anywhere using this web interface. Get real-time graphs for all sensors. Get an e-mail if things get too hot. Attach a web-cam and see who's poking around the cabinet. Export sensor logs to Excel or get real-time data by XML, SNMP, or TELNET. Integrates with What's Up, IPSentry, OpenView, and more.
Supported on Windows NT/2000/XP (runs as a service) and Linux. Uses minimal CPU.