Downloads - WxGoos
Software Downloads: WeatherGoose (All Models)
Download the latest firmware for the WeatherGoose. Follow the included directions carefully or the unit may be permanently damaged. Download automatically erases previous firmware so no erase is needed. Supports the following models:
  • WeatherGoose (WxGoos-1)
  • SuperGoose (WxGoos-2)
  • MiniGoose (WxGoos-3)
Software Version History - WxGoos Firmware
2.78
  • added: Support for Panasonic IP-enabled webcams
  • fixed: Improved compatibility with Apache proxy
  • fixed: Friendly name display bug
  • fixed: Improved CSV file compatibility with Excel
  • fixed: "address-backup" attribute in XML
  • fixed: SSL partial packet bug
  • removed: unused SNMP Read/Write Community from config page
2.76
  • added: CCAT sensor types for City Power Monitor, Smoke Alarm, -48Vdc, 30Vdc
  • added: ESMTP AUTH support ( login, plain, CRAM-MD5 )
  • fixed: new SNMP code with speed & stability improvements ( download new MIB from Goose )
  • fixed: WAP page incompatibility with some mobile browsers
  • fixed: XML Dewpoint sensor keys aliased with Temperature keys
2.75
  • added: unit description field to Config page and footer
  • added: sensor count to SNMP
  • fixed: multiple sensor instances issue
  • fixed: alarms show tripped status on XML page
  • fixed: SSL problems
2.72
  • fixed: remote temp sensor value glitches
  • fixed: negative values mislabeled on graph axis
  • fixed: max values on graph coincide with graph border
2.70
  • added: immediate sensor value displayed in 'logs' page
  • added: support for digital CCAT sensor
  • added: support for D-Link DCS-2000
  • fixed: WAP page not affected by view-only account
  • fixed: friendly device name not displayed in browser window
2.65
  • added: support for dew point sensor
  • added: alarmTripType SNMP Trap variable binding
  • added: support for D-LINK DCS-3220
  • fixed: NTP service did not switch between primary/secondary addresses on NTP server timeout
  • fixed: temp sensors become unplugged near 0 °C
  • fixed: sensor friendly name and product friendly name in MIB Trap definition
  • fixed: incorrect sensor friendly name OID value in SNMP trap
2.63
  • fixed: DNS applies to NTP
  • fixed: updater not allowing updates to units with certain older firmwares
2.62
  • added: Support for DNS names in SMTP, POP3, SNMP, and NTP server names
  • added: PDA control page for RCM
  • added: Support for D-Link DCS-6620 camera
  • added: Telnet "uptime" command displaying elapsed time since last reboot
  • added: Telnet "datalog" command to dump sensor log data for debugging
  • added: Alarm emails now display most useful information first for devices that truncate emails (e.g. cell phones)
  • added: Device administration information now included in status report and alarm emails
  • fixed: Adding in missing imports (normally tacit) from MIB
  • fixed: MiniGoose and RSMINI163 now respect user-specified internal temperature offset
  • fixed: Alarm buzzer option removed for RSMINI163
  • fixed: No longer allows arbitrary number of simultaneous telnet connections
  • fixed: Device checksum not being displayed in telnet "report" command
  • fixed: Removed "HTML v4.0.1 Verified" image from the bottom of the page as it gave spurious error message on certain browsers when using HTTP/SSL
2.60
  • added: Periodic status report email, configurable frequency
  • added: Internal temperature adjustment from web page
  • added: Complete support for HTML v4.01 W3C standard
  • added: Alarm e-mails now more descriptive
  • added: Configurable port numbers for SMTP and POP3 services
  • added: Checkboxes work when you click on their labels
  • added: Better error-handling for timezone offset setting
  • fixed: Saving alarms page could sometimes send extra alarm notification
  • fixed: First char in camera IP had to be a digit; now it can be alphanumeric
  • fixed: Support for SMTP servers that output multiple lines for welcome message
  • fixed: Changing NTP timezone no longer forces reboot
  • fixed: MIB CSV file now has correct values for "read/write" column
  • fixed: Downloading CSV raw log data and log dumps is now cancelled when firmware upload is initiated
2.56
  • added: Support for up to 4 cameras displayed on a single unit
  • added: Support for D-Link DCS-5300/5300G camera
  • added: Support for MiniRSE 136
  • fixed: Read-only username couldn't be set in certain cases
  • fixed: Support for up to 16 RTAFH sensors (was failing after 12)
  • fixed: HTML/XML error when certain special characters appears in friendly names or logging statements
  • fixed: Buffer over-run in event time-stamp logger
  • fixed: Removed special "(None)" FTP account
  • fixed: Very occassional "[nil]" displayed as the name of the unit
2.55
  • added: SNMP community strings for read-only and read/write access
  • added: Including Excel spreadsheet with detailed MIB report in installer ZIP file
  • added: Support for browsers (especially on PDA's) that don't support the <IFRAME> HTML tag
  • added: Device support for new enhanced console features
  • fixed: Bounds-checking error on humidity readings on AFHT2 external sensor
2.51
  • added: Now using GIF format for graphs for faster download times
  • added: Support for D-Link 900 and 950/950G cameras
  • added: Additional device data in XML report
  • fixed: FTP server update for faster retry when firmware upload fails
  • fixed: restore defaults sets correct port numbers for http/https and forces reboot
2.48
  • added: SSL v3.0 and TLS v1.0 support for HTTPS
  • added: ability to disable either HTTP or HTTPS servers and set port numbers
  • added: four new data fields to store device location and administrative contact information
  • MIB update to support NetSNMP library/console client software
  • fixed: airflow graph occasionally spikes
  • fixed: random buzzer alerts when many devices plugged in at the same time
  • fixed: graphs drawn incorrectly on some Macintosh browsers
2.46
  • added support for new RTAF/RTAF-H sensors
  • added tooltips to sensor display
  • new double-click-and-wait installer
  • CSV export now uses friendly names in column headings
  • fix for bogus "relay failure" indicators on PowerEgg2
  • added support for new WxGoos-3 (MiniGoose) product line
  • administration passwords now apply to TELNET/FTP servers
  • added ability to enable/disable TELNET and SNMP servers
  • added ability to change HTTP port
2.30
  • removed underscores from MIB trap variables for compliance with certain SNMP consoles
  • support for RSM-H2 and PowerEgg2 outlet on/off control
  • added alarm data to XML
  • fix for broken graph problem
2.29
  • fix for having identical read-only and administrator usernames and passwords
  • fix for temperatures between -20°C and -10°C
  • e-mail test feature had trip/clear setting swapped
  • support for new RSM-H2 unit
  • support for new airflow/temp/humidity combo remote sensor
  • cameras supported in new Console
2.27
  • added ability to send test alarms (both traps and emails) for any given alarm condition on any sensor and device
  • fixed bug where "Restore Defaults" causes accessories to disappear until device reboot
  • support for English power (208V) in base and accessories
  • small XML format change for compatibility with ITW Console
2.22
  • support for new remote sensors: airflow with offset, door, water, 0-5V meter
  • changed trap numbers to be comptabile with What's Up Gold's 2-byte limitation
  • special handling for certain types of temperature sensor errors
  • fast remote device communication for faster "real-time data" updates
  • changed POP3 protocol slightly for compatability with certain mail servers
2.19
  • Better error-handling in noisy environments with remote sensors
2.18
  • Added support for multiple alarm e-mail receipents
  • Added "clear" trap support in device and in MIB
  • Fixed bogus alarms on device startup
  • Fixed infrequent error in sending traps
  • Added more graph colors
  • Sending alarms for "high," "low," and "unplugged" as separate events instead of single "set/clear" event
2.11
  • Fixed SNMP traps with incorrect "Agent Address"
  • Added SNMP traps to the MIB
  • Fixed gaps in logs during long CSV downloads
  • Fixed crash on SNMP trap
  • False failures on SuperGoose's
  • Airflow/Temperature correction algorithm
2.2
  • Added remote reboot telnet command
  • Another fix for "gray graph" problem
  • Support for new SuperGoose and PowerGoose products
1.32
  • Various SMTP/POP3 fixes
  • When power off on PowerEgg, now shows as "unplugged"
  • Improved logging accuracy for certain sensors
  • Fixed custom log error where the legend doesn't match the graph
  • Fix for "gray graph" problem
1.24
  • Added support for separate "read-only" and "admin" accounts
  • Added password verification fields
  • More efficient air-flow sensor readings
1.20
  • Re-fixed I/O 2&3 naming problem
  • Added WAP and PDA support
  • Log data now lists actual time if NTP server present
  • Adjusted default ranges on I/O ports
1.19
  • Fixed non-responsive RTAF Sensors
1.18
  • Fixed door sensors only responding once
  • Downloadable CSV file now available under 'Logs' tab
  • Updated MIB
  • Remote Airflow compatibility improvements
1.17
  • Added NTP support
1.14
  • Fixed passwords not taking effect
  • Fixed automatic rebooting
  • Fixed I/O 2&3 port naming
1.10.3
  • Added graphing support
  • Optimized internal logging
  • Can now read temperatures below zero
1.0
  • Initial release