WaterSnake Configuration and Model Numbers (HTML)


The sensing cable is orange and has connectors at each end.

 

This drawing shows the six components. A server room is shown looking down at the floor. The Sensing Cable is shown in orange. The Leader Cable connects to the Interface Box (blue). A four conductor cable connects to the WeatherGoose.

The small Interface box mounts on the wall and supplies signals to the WeatherGoose. Up to 300 feet of water sensing cable can be used.

The photo shows the cable terminator (EOL). The end of the sensing cable must have one of these.

The sensing cable is held to the floor with these J-clips. Place them about 2' apart and in the corners. Clean the floor with the alcohol cleaner first.

Components and Model Numbers

Add Water Detecting Cable to your Weather, Super or MiniGoose

Pre-Configured Kits: The easiest way to get started. All the parts you need, no thinking necessary. The WeatherGoose monitor is not included.

IT-KIT-10 10' of sensing cable - $388.
IT-KIT-40 40' feet of sensing cable - $567.
IT-KIT-60 60' feet of sensing cable - $779.
IT-KIT-120 120' of sensing cable - $1186.
IT-KIT-300 300' of sensing cable - $2425.
IT-KIT-40x50 One 40' and one 50' sensing cables plus one non-sensing cable - $1029. Covers two separate rooms.

Build Your Own System: Configure a system exactly as you want it. Call 1-512-257-1462 (CST), ITW tech support, for configuration help. The listings below show the WaterSnake's components. Individual components must be ordered over the telephone so we can make sure you're getting the right gear. Kits can be ordered over the web.

Required items:
8700 Interface Box (one required)- $145
8701 Leader Cable (one required), 15' - $50
8702 10 pack, J Clips - $17 (put clips every two feet)
8703 25 Pack, J Clips - $33
8714 Power Supply, wire length: 6' (one required) - $14
8715 Wire to connect Interface Box to WeatherGoose, 50' (one required) - $28

You need one Sensing Cable with a terminator plug (EOL). The cable can be lengthened by inserting sensing cable without a terminator plug. Select one of these below:

8704 10' water detection cable w/ EOL(end of line) connector - $134
8705 40' water detection cable w/ EOL(end of line) connector - $297

Add these Sensing Cables if you need longer Sensing Cables (300' feet max.)

8706 SC-10 10' Leak Detection Cable - $128
8707 SC-25 25' Leak Detection Cable - $223
8708 SC-50 50' Leak Detection Cable - $357
8709 SC-100 100' Leak Detection Cable - $604

If you need to pass over a wall or through some non-critical areas you can add these interposing cables:

8710 NSC-10 Non Sensing Cable, 10' - $72
8711 NSC-25 Non Sensing Cable, 25' - $106
8712 NSC-50 Non Sensing Cable, 50' - $139
8713 NSC-100 Non Sensing Cable, 100' - $173

A sample system: Suppose you need 50 feet of sensing cable. Order these items:

8700 LDZ1-OEM Interface Box - $145
8714 Power Supply, wire length: 6' (order one) - $14
8701 LD-LC-15C Leader Cable, 15'- $50
8715 NSC-B-50 Connect WS-1 to WeatherGoose, 50' - $28
8703 JC-25 25 Pack, J Clips - $33
8702 JC-10 10 pack, J Clips - $17
8705 SC-40-EOL 40' water detection cable w/ EOL plug - $297
8706 SC-10 10' Leak Detection Cable - $128
Total parts cost: $712.

 

Notes:

1. 300 feet max sensing cable run.
2. MiniGoose requires two CCAT interfaces.
3.Specification sheet and installation instructions available on the Downloads tab of the ITW website.
3.Call tech support for configuration help 1-512-257-1462.