Smoke Alarm
This kit connects a standard Smoke Alarm with the WeatherGoose, SuperGoose or a WeatherDuck. The SA-1 is wired and assembled, ready for installation.
The Smoke Alarm kit is contains all the parts to get smoke detection up and running fast. A 5-15 power plug connector is standard.
The Kidde Smoke Alarm supplied is powered by 120vac city power and contains a 9vdc battery for backup in the case of power failure.
This type of smoke alarm has a third wire that triggers a group of smoke alarms when one senses smoke. This third wire is used to relay the alarm state to the WeatherGoose. The group relay initiating function of the smoke alarm is retained.
The supplied wiring makes installation easy. Plug the cord into the wall plug; attach the output wires into the WeatherGoose. Test the installation by pressing the alarm’s Test button.
The schematic shows how the Smoke Alarm wires to the interface and the WeatherGoose. Up to three can be directly attached to the three C123C ports on the Gooses and the Duck.
Specifications
Model: Kidde 1275, white plastic case (or equiv.)
Buttons: test, reset, hush function
Alarm: buzzer, 85db
Red Indicator: flashes for normal condition
Power: 120vac, 80mA
Low battery: chirp sound
Interconnection: third wire to other alarms
Connection: direct to C123C ports on WxGoos
Temp Range: 40F to 100F
Humidity Range: up to 85% RH
Sensor: Ionization
Model Number: SA-1
Supplied Parts
SA-1 comes assembled, pre-wired, ready for installation with the following components:
- Kidde 1275 Smoke Alarm (or equivalent)
- Power wire: 30 ft, with 5-15 plug
- Junction box with strain reliefs
- Sensor wire: 30 ft. 24 awg, wire pair
- Interface installed in junction box
Installation
The alarm can be easily ceiling or cabinet mounted. When there is no alarm, the I/O port value will be 99. When smoke is sensed, the value is changed to 1. Alarms can be set to create e-mail, paging, and SNMP Trap alerts.