MiniGoose Data Sheet (HTML)

Internal Sensor
Temperature: -20C to 50C (-4F to 122F), +/-0.5C*
Video Camera
Axis 205, 206 or equivalent (optional)
External Sensors (16, ordered separately)
Temperature
Air Flow and Temperature
Humidity, Temperature and Air Flow
Power Monitors: PowerEgg 1 and 2
CCAT Universal I/O Interface Sensors:
Door position sensors
Current transformers
Water sensors
City power monitor
Any 0 to 5vdc output device
Specifications
Physical: 4”L x 1.5”H x 1.5”W, 0.5 pounds
Power: 6vdc (wall transformer supplied), 2.1mm
Ethernet: 10/100 autosense, RJ-45 receptacle
Standards: FCC Part 15, CE

MiniGoose WxGoos-3 The MiniGoose can monitor up to 16 cabinets. Splitters increase the number of ports to sixteen. The remote sensors are connected using CAT 3 cable and RJ-11 connectors. An aggregate cable length of 600 feet can be used.	Low Cost Climate Monitor - MiniGoose: WxGoos-3
	A bare-bones version of the WeatherGoose, this small monitor fits where space or budgets are tight. Optional video camera.
	Need a lot of remote climate sensors? Short on cabinet space? This tiny monitor has web access, graphing, and e-mail alarm alerts. Supports up to 16 remote sensors plus an internal temperature sensor. MiniGoose contains the same web engine as WeatherGoose climate monitors but relies on external sensors instead of internal sensors to reduce size. An optional web camera shows a view of the monitored cabinets. Software Features HTTP - web access Alarms - high, low, unplugged Graphs - all sensor values graphed SMTP/POP3 - e-mail alerts, POP password SNMP - MIB with Gets, Traps and Clears Paging - e-mail to pager proxy XML - all values exposed and meta-tagged Logging - Excel logs created, time set PDA - Personal Digital Assistant format WAP - Cell phone display format Console - multiple MiniGoose viewer optional Installation The MiniGoose can be screw-mounted using the 0.125” mounting holes or tie-wrapped to a cabinet rail. Model Number: WxGoos-3 Internal Sensor Temperature: -20C to 50C (-4F to 122F), +/-0.5C Video Camera Axis 205, 206 or equivalent (optional) External Sensors (16, ordered separately) Temperature Air Flow and Temperature Humidity, Temperature and Air Flow Power Monitors: PowerEgg 1 and 2 CCAT Universal I/O Interface Sensors: Door position sensors Current transformers Water sensors City power monitor Any 0 to 5vdc output device Specifications Physical: 4”L x 1.5”H x 1.5”W, 0.5 pounds Power: 6vdc (wall transformer supplied), 2.1mm Ethernet: 10/100 autosense, RJ-45 receptacle Standards: FCC Part 15, CE
	Note on Internal Temperature Sensor
	*The internal temperature sensor is heated by internal circuitry. Depending on room airflow, the sensor will consistently read from 2 to 7 degrees F above ambient. Users should note this difference in observing temperatures and graphs. Remote sensors are the primary means of temperature measurement in the MiniGoose and are immune to internal circuit heating.